Overview
Specification
Resource
Application
Model
- Overview：
- Cat4 mode：LTE-FDD、LTE-TDD、TD-CDMA、WCDMA、CDMA2000、CDMA、GPRS
- GPS positioning function, combined with comway GPS software, can display position, motion track and historical track
- One 10 / 100MB Ethernet port and one serial port (RS-485 / RS-232). Configure various parameters of DTU through serial port, WiFi and network port
- Support TCP / UDP, multiple socket protocols and multi server parallel communication
- Comway Protocol
- Standard TCP/UDP Protocol
- Support mqtt, HTTP protocol and customized protocol to facilitate communication with multiple platforms
- Routing internet access function: DTU can be used as a routing gateway to establish communication between its connected Ethernet equipment and the Internet
- Port mapping: supports external network access to intranet devices
- VPN communication function: realize PLC and HMI program download based on VPN network, connect network port HD camera, and remote video monitoring as immersive
- Has the conversion function of Modbus TCP and RTU protocol: it is easy to connect Ethernet devices such as PLC through network port
- Online network management is realized through Netview software
| ITEM | Technical parameter |
| Mobile parameters： | 4G:LTE-FDD、LTE-TDD |
| 3G：WCDMA、TD-CDMA、CDMA2000 | |
| 2G: GPRS、CDMA | |
| SIM parameters: | SIM Control: 1.8v and 3v Micro Sim卡 |
| Socket Protocol: | Comway，standard TCP/UDP，MQTT,Http |
| Data format: | Support modbus rtu/tcp and any others |
| Ethernet Port: | one port 10/100MB |
| Serial Port: | one port RS-232/RS-485 |
| Serial port pin definition: | RS-232: TxD, RxD, GND |
| RS-485: A, B | |
| DTU Poweron control pin | P pin, high-level startup, low-level shutdown |
| Overall dimensions and materials: | 108x74x35mm，The shell material is iron。 |
| Weight： | 220g |
| Working parameters： | working temperature：-30° to 75° |
| Working humidity：5 to 95%RH | |
| Power requirements： | input voltage：5 to 24 VDC |
| Average operating current：60~150mA@ 12V | |
| Maximum operating current: 1A@+12V DC | |
| Shutdown leakage current: 20uA@+12V DC |
| GPS Parameters | |
| GPS Receive Channel: | 50-channels |
| Frequency | GPS L1(1575.42MHz) |
| C/A code | 1.023MHz |
| SBAS Standard | WAAS, EGNOS, MSAS, GAGAN |
| Update Frequency | 4Hz |
| Positioning accuracy | 2.5m CPE |
| Positioning takes time | |
| cold boot 35s | |
| warm start 29s | |
| hot start: 1S | |
| GPS signal sensitivity | -160dBm |
| Cold start signal sensitivity | -144dBm |
| Time accuracy | RMS error: 30ns |
| 99% error: 60ns | |
| Discrete error: 21ns |
Documentation |
WL-4010&4030 4G DTU Data Sheet | ||
Documentation |
WL-4010&4030 4G DTU Configuration Guide | ||
Documentation |
WL-4010&4030 4G DTU Application Note | ||
Documentation |
COMWAY 4G DTU AT Commands Description | ||
Software |
4G DTU Configure Software | ||
Documentation |
Introduction of wl-4020 GPS + 4G DTU GPS Application | ||
Software |
COMWAY GPS Position Software | ||
Documentation |
Comway 4G DTU&Ethernet DTU Implementation of VPN communication | ||
Software |
COMWAY VPN-Server software | ||
Documentation |
Implementation of 4G&Ethernet DTU and VPN client software communication | ||
Software |
COMWAY VPN-Client software | ||
Documentation |
Instruction of 4G DTU sending and receiving SMS by AT Command | ||
Documentation |
Instruction of remote modification of DTU configuration by SMS | ||
Package |
WL-4010&4030 4G-LTE DTU Complete technical data package | ||